Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Denver, CO
We provide independent Ghost Controls repair across Denver, and the thing that makes our work here different is where we mount and power these openers. Ghost Controls builds solar and low-voltage swing operators, and in Denver the panel’s job is decided by elevation, shade and hard freeze-thaw winters. We’re a gate-only crew led by Vernon Hobbs, and we’re not affiliated with, authorized by, or endorsed by Ghost Controls. Call (855) 677-8291. We answer 24/7.
Why Denver Residents Choose Us for Ghost Controls Service
We know the actual pieces inside a Ghost Controls kit. That means the Titan 12 (TDS12), the AXO1 on a single swing, the AXO3 on a double gate, and the keypads and remotes that ship with them. When the control board throws a limit fault, we’re reading the board rather than guessing at it. Our techs have traced enough Ghost Controls wiring across the Front Range to hear where a problem lives before the meter comes out. That’s not a slogan. It’s why we get called on the ones another tech already walked away from.
We work on Ghost Controls equipment with quality parts that fit it – genuine boards, arms and keypads where the housing or firmware matters, and aftermarket batteries, solar panels and hinges where they outlast the originals in Denver UV. We also schedule clearly, because a gate that’s dead is an access problem, not a someday problem. Vernon Hobbs grew up in Globeville and trained in industrial mechanics and electrical systems at Emily Griffith Technical College, then spent years on automated access systems before starting this shop in 2015. We’ve served Denver for 11 years.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Common Ghost Controls Gate Repair Problems We Solve in Denver
- Battery and solar charge failure after UV damage: Denver’s high-altitude UV chalks and cracks the panel housing over time, so a Titan or AXO board goes dead mid-winter with no obvious cause. We test the panel under load, not just at rest, because an undercharge shows up as a dead board and looks like a board problem.
- Worm-gear and board corrosion on low-mounted openers: Summer hail and standing water get into an opener mounted low on a builder-grade steel post, and the worm gear and board pay for it. Green Valley Ranch and Central Park tract gates on shallow footings see this most, because water pools at the post and the opener sits close to it.
- Limit and arm-position faults from post heave: Denver’s freeze-thaw cycles lean a gate post a half-inch over a season, and the Titan arm then over-travels and trips a fault on a gate that used to run clean. This is a realignment job before it’s a parts job.
- Obstruction stalls from hinge and latch creep: The dry Denver climate shrinks wood gates and opens hinge and latch gaps, so the operator pushes into a struck latch and the AXO’s obstruction sensing trips. We find the mechanical binding first.
- Arm and bracket wear on heavy pedestrian gates: A wrought-iron pedestrian gate with an arm mounted too far outboard loads the gearbox past what it was built for. On anything that heavy, geometry matters as much as the motor.
Ghost Controls Service in Denver: What Local Conditions Mean for Your Equipment
The 1,900-foot drop from the foothills to the city floor changes how a solar panel behaves. A Ghost Controls panel that charges fine in Evergreen can sit under-charged on a shaded north-facing driveway in Baker or Capitol Hill, and the owner reads that as a dead opener rather than a power problem. We size the panel and battery to the actual site instead: how the roof line shadows the panel in winter, which way the driveway faces, how many cycles a day the gate makes. That’s the difference between a Titan 12 that runs all season and one that quits every January. Denver’s freeze-thaw swing – 60°F by day, teens at night, routine in winter – makes a marginal charge situation fail fast. When a homeowner in Washington Park called about a Titan 12 that stalled halfway open, we found the arm fighting a brick pier that had tilted on our expansive clay after a wet spring. We re-set the pier, realigned the gate and arm geometry, and swapped the solar panel whose housing had chalked out under Denver UV. The Titan now cycles clean and the battery holds through the night.
Ghost Controls Model Lines & Products We Service in Denver
We service the Ghost Controls solar and low-voltage swing openers you’ll actually find on Denver gates: the Titan 12 (TDS12) high-traffic solar swing opener, the AXO1 single-swing opener, the AXO3 dual-swing opener for double gates, and the keypads and wireless remotes sold with those kits. We use genuine Ghost Controls control boards, arms and keypads where the housing or firmware matters, and quality aftermarket batteries, solar panels and hinges where they outlast the originals in Denver UV and hail. On an older opener with a fried board plus a bent arm, we’ll tell you straight that a fresh kit is the honest call. On a sound Titan or AXO, we repair rather than upsell.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Denver
Pricing depends on what actually failed, and we quote it in writing before any work starts. A realignment and limit reset sits at the low end. A board swap, a battery and panel replacement, or a motor repair sits mid-range. A full re-motor or kit replacement sits higher, because the parts and labor are larger. The written estimate sets the final price, and the estimate itself is free.
- Gate realignment and limit adjustment
- Battery backup and solar panel replacement
- Motor repair and control board replacement
- Accessory work: keypads and wireless remotes
What drives the number is cycle count, how accessible the opener is on the post, and whether the gate itself needs work before the operator can run clean. Call (855) 677-8291 for an exact quote – estimates are free.
Serving Denver, CO – Our Local Coverage Area
We serve Denver and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Denver
That’s a battery losing capacity in the cold, usually because the solar panel isn’t charging it fully during the shorter winter days. We test the panel under load and check shade across the driveway before we blame the opener. That’s the difference between a fix and a repeat call. Call (855) 677-8291 for an exact quote – estimates are free.
Usually yes. The board is replaceable and the panel is swapable; what matters is whether water reached the worm gear. We open the housing, check corrosion, and repair if the internals are sound. On low-mounted openers in Green Valley Ranch and Central Park, hail and standing water are the usual culprits.
Nine times out of ten it’s the gate, not the motor. A post that leaned a half-inch on Denver clay turns into an arm over-travel and a fault on the board. We check the gate geometry first, realign, then test the operator. That’s how we avoid a second visit.
The operator handles it fine if the post and arm are set correctly. Freeze-thaw heave on shallow concrete footings is a realignment job, not a motor replacement. We reset the post, re-shim the arm, and re-run the limit calibration. Then the operator does what it was built to do.
If the housing is sound and the gearbox has life, repair is the honest answer. A fried board plus a bent arm on an older kit pushes toward replacement, and we’ll say so plainly. On a sound Titan or AXO, we repair. Call (855) 677-8291 for a free estimate and a straight answer.
Service Areas Near Denver
We work across Denver and out to Four Square Mile, Commerce City, Welby, Sherrelwood and Dakota Ridge. If your gate is on a hilltop in the foothills or a shaded driveway in the city, we size the panel and battery to the site. Call for coverage on your street.
Book Your Ghost Controls Service in Denver Today
If the gate isn’t working right, there’s a reason – and finding it is the job. Call (855) 677-8291. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free and the price is set in writing before any work starts.
Written by Vernon Hobbs, Owner & Lead Technician at Gate Repair Denver, serving Denver since 2015.