Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Four Square Mile
If your gate won’t swing, won’t slide, or drags across the concrete every winter, we’re the gate-only shop that understands why. Four Square Mile sits in an unincorporated pocket of Arapahoe County, and the gates here fight some of the most stubborn ground on the Front Range. We work on swing gates, sliding gates, iron gates, and the operators that move them, and we’re familiar with the tight lots and aging posts that define this neighborhood. Call (855) 677-8291 and we’ll get a technician headed your way. We answer 24/7, with fast dispatch from 7am to 7pm for gate repair and same-day work.
Why Four Square Mile Homeowners Call Gate Repair Denver for Gate Repair
Gate Repair Denver is led by Vernon Hobbs, and we’ve been at this since 2015. We’re a dedicated gate specialist, not a fence company or a garage-door shop that added gates to the menu. That narrow focus means our technicians diagnose gate problems faster than a generalist who splits time across a dozen product categories, and they tend to get it right the first time instead of coming back for round two.
Four Square Mile calls come to us because we know the ground here. We know that a gate that closes fine in June will drag on the apron by January, and we know the difference between a hinge problem and a post problem before we ever pull into the driveway. Since 2015 we’ve built a strong local reputation on that kind of straight diagnosis, and the properties we work on across the 80231 pocket and its shared fence lines have taught us a thing or two about footings.
When you call, we answer 24/7 and dispatch technicians with fast dispatch from 7am to 7pm, Sunday through Friday. That means most Four Square Mile gate repairs are diagnosed and quoted the same day you call, and the written price is agreed before any work starts.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Iron Gate Repair in Four Square Mile
Iron Gate Repair in Four Square Mile is usually a story about posts and rust, not just the gate leaf. The wrought-iron driveway gates on these compact 1960s – 70s lots hang from metal or cedar posts that were often set too shallow for the soil here, and after seasons of heaving they rust at the hinges and swing out of square. A typical iron gate repair around Four Square Mile runs $180 – $450, depending on whether we’re re-hanging the leaf, repairing rusted hinge hardware, or rebuilding the post footing. Side-yard iron gates on a shared line often come in at the lower end; a heavy driveway gate with anchored posts climbs from there.
Rusted Hinges and Hardware
Original iron gates rust at the hinge barrels and weld points, and a hinge that has swollen with corrosion stops pivoting cleanly. We cut out the tired hardware and weld in new hinges rated for a heavy leaf, then check that the gate swings true on its existing post. If the post is the real culprit, we’ll tell you before we start.
Re-Setting the Anchors
Anchors on these older iron gates were often set shallow, and expansive clay pushes them out of plumb year by year. We pull the anchor, dig out the old footing, and re-set it in a deeper collar that reaches below the active clay layer. That’s what stops the seasonal sag for good.
Sliding Gate Repair in Four Square Mile
Sliding Gate Repair in Four Square Mile tends to involve track that has shifted or a rack and pinion that has jumped its gear. On the tight lots here, sliding gates ride a short concrete or steel run, and once the posts that carry the track heave, the whole gate can come off true. A typical sliding gate repair around Four Square Mile runs $250 – $600, with a track realignment and hardware replacement landing mid-range and a full post re-set at the top end. A gate that still rolls but has lost its automatic drive often costs less to sort out.
Jumped Tracks
When a sliding gate jumps the track, it’s often because the ground moved under the carrier posts, not because the rollers failed. We check the track for plumb and level against the posts before we touch the gate itself. Correcting the post fixes the track, and the gate stops jumping.
Rack and Pinion and Rollers
Worn rack and pinion gear teeth skip and make a grinding sound as the operator drives. We replace the worn rack sections and rollers, then re-run the operator through its travel to confirm smooth movement. That kind of repair is straightforward when the posts are solid underneath.
Trusted Brands We Service in Four Square Mile
We work on the brand you already own. Gate operators in Four Square Mile are often LiftMaster, FAAC, BFT, or Linear systems, and we’re experienced with all of them, along with the other major lines we service. We keep common parts on hand for Four Square Mile customers, which shortens the turnaround on an operator that’s quit opening or lost its programming. If your opener has stopped responding or your gate won’t move at all, our technicians can diagnose the system and quote the fix, and the price is agreed before any work begins. We handle manual and automatic gates alike, from swing to slide, and we don’t farm out the tricky ones.
Common Gate Repair Problems We See in Four Square Mile Homes
- Heaved post footings. Four Square Mile’s expansive bentonite clay swells when wet and shrinks when dry, and shallow 1960s – 70s footings heave with it. The gate leaf then drags on the concrete apron, and the fix starts at the post footing, not the hinge.
- Rusted hinges and rack hardware. The heavy original wrought-iron gates here hang from aging metal or cedar posts, and the hinge barrels and rack and pinion gear rust through the seasons. A swollen hinge stops a heavy leaf from pivoting cleanly.
- Operators cycling out of alignment. As posts shift seasonally, an automatic operator can lose its travel limits, throwing off the loop detector and keypad entry on a gate that used to run perfectly. Reprogramming fixes it once the posts are stable.
- Sliding gates that jump the track. When the carrier posts heave, the track goes out of level and a sliding gate jumps the track or skips its rack. That’s a post-and-track job, not a roller swap.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Four Square Mile, CO
We quote by the job, and the estimate is free. Here’s what gate repair typically runs in Four Square Mile:
| Repair type | Typical estimated range |
|---|---|
| Iron gate repair (hinges, hardware, re-hang) | $180 – $450 |
| Sliding gate repair (track, rack and pinion) | $250 – $600 |
| Electric gate repair (operator, controls, safety edge) | $200 – $550 |
| Hinge and post repair / post re-set | $250 – $700 |
What moves the number: whether the job is a hinge swap or a full post re-set, whether original wrought iron needs welding, and whether the ground has to be dug out to the deeper collar. A heaved post on a shared fence line can also mean coordinating with a neighbor, which affects scheduling more than price. We give you a written estimate before we start, and that written price is what you pay. Estimates are free.
We Also Serve Cities Near Four Square Mile
The Four Square Mile pocket sits surrounded by Denver and Aurora, and our gate repair work reaches the nearby communities too. If you’re just outside the 80231 lines, we cover Englewood and Denver, plus Commerce City and Sherrelwood up the road. You can learn more about Four Square Mile gate work on our city page, or take a look at our full gate repair services. Wherever you are along the Denver-Aurora seam, the driveway gate and the operator get the same careful diagnosis.
Serving Four Square Mile, CO – Our Local Coverage Area
We serve Four Square Mile and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Four Square Mile
Because the ground under the hinge post heaves with the freeze-thaw cycle, pushing the post up and tipping the gate leaf so it catches the apron. The Front Range sees roughly 150 days a year with a freeze, and Four Square Mile’s bentonite clay swells and shrinks with the moisture, so the post shifts seasonally. The fix is to pull the post and re-set it in a deeper concrete collar below the active clay, not just to tighten the hinge. Call (855) 677-8291 for a free estimate on re-setting it.
Yes. We repair wide-swing and heavy entrance gates, including the operators that drive them, anywhere around the 80231 pocket and its edge. A wide gate on a long run needs a post and operator sized for the span, and our technicians check the footing and the drive before quoting. We’re experienced with LiftMaster and FAAC operators as well as other major lines. Call for a free estimate and we’ll size the repair to your gate.
It usually means the re-set of a heaved post or a shared hinge needs coordination with the neighbor, since the fence line and the gate are jointly maintained. Because Four Square Mile is an unincorporated pocket that Denver and Aurora wrap around, the compact shared lots here put a lot of gates right on a property line. We’ll walk you through what the repair involves so you and your neighbor can agree before we start. The written estimate keeps the price the same either way. Call (855) 677-8291 for a free estimate.
Yes, we repair electric and automated gate systems as a core service, not an add-on. When an operator quits opening it can be the motor, a control board, lost programming, or a safety device like a photocell or loop detector throwing a fault, and we diagnose the system before touching parts. We service LiftMaster, FAAC, BFT, Linear, and the other major lines. Automatic repair typically runs $200 – $550, and we agree the written price before any work starts. Call for a free estimate.
Yes. A sliding gate that jumps the track or strips its rack and pinion usually has a carrier post that has heaved out of level, so we correct the post and track first and then replace the worn rack and roller hardware. Sliding gate repair in Four Square Mile typically runs $250 – $600. We quote the job after looking at the track and posts, and the written estimate sets the final price. Call (855) 677-8291 for a free estimate.
Get Your Four Square Mile Gate Fixed
Whether it’s a 1970s cedar privacy gate dragging on the concrete, a wrought-iron driveway gate rusting at the hinges, or an automatic operator that’s quit opening, we can diagnose and fix it. We work on the brand you already own, and the estimate is free. Call (855) 677-8291. We answer 24/7, with fast dispatch from 7am to 7pm. The written price is agreed before any work starts.
Written by Vernon Hobbs, Owner at Gate Repair Denver, serving Four Square Mile since 2015.