Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Denver, CO
Gate installation in Denver is its own kind of job. You’re working on clay that swells and shrinks with the seasons, on a freeze-thaw swing that loosens footings, and on a building stock that runs from original wrought iron on brick piers in Capitol Hill to builder-grade aluminum in Green Valley Ranch. We’re gate-only specialists: repair, electric systems, and installation. Call (855) 677-8291 and talk to someone who works on gates, not fences or garage doors.
Why Denver Homes Are Different
Denver’s gate work splits along a building-age line and along elevation. The historic districts – Capitol Hill, Baker, Highland, Washington Park – have original wrought-iron and early steel pedestrian gates on brick-and-stone piers. Those gates need forge-and-weld restoration, not a replacement panel from a catalog. The post-1990 suburban belt, from Stapleton/Central Park out to Green Valley Ranch and the southern metro, is dominated by HOA-governed decorative aluminum and vinyl driveway gates. Repair there is driven by developer-grade hardware failures and HOA aesthetic rules, not historic preservation.
Underneath all of it is the ground and the weather. Pre-1940 brick bungalows and Denver Squares often mount gates to masonry piers that have shifted on expansive clay soils, so a sagging iron gate on a tilted brick pier usually means re-setting the pier, not adjusting hinges. The 1990s and 2000s tract subdivisions use prefab aluminum and vinyl gates on steel posts set in shallow concrete footings, and those footings heave and lean through Denver’s freeze-thaw cycles. Add intense high-altitude UV, hail season from June through August, and routine winter swings from roughly 60°F by day to the teens at night, and you get hardware that seizes, powder coat that chalks and fades, and panels that take hail dents.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Denver Services
Most Denver calls come down to two things: a gate that’s broken, or a gate that used to open on its own and doesn’t anymore.
Gate Repair in Denver
Mechanical repair covers the frame, hinges, latches, track, rollers, and the posts and piers the gate hangs from. In Denver, that means checking the footing as often as the hinge. A gate that drags at one end after a wet spring is telling you the clay under it moved. We look at the whole assembly – gate leaf, posts, hardware, ground clearance – because adjusting a hinge on a leaning post buys you a few weeks at most. Call gate repair when the gate still works but doesn’t work right: scraping the ground, latching hard, or hanging off square.
Electric Gate Repair in Denver
When a gate stops responding entirely – the remote does nothing, the arm won’t reverse, the keypad lost its codes – that’s operator and access-control territory. We diagnose the control board, the safety edges, the loop and photo-eye sensors, the wiring run, and the battery backup rather than swapping parts until something works. Dry Denver air and cold snaps are hard on sealed boards and connectors, and a sensor knocked slightly out of alignment by a frozen gate leaf will stop a system dead. Start with electric gate repair if the gate is powered or automatic.
Gate Installation in Denver
New gate installation in Denver starts with two questions: what the ground will do to the posts, and what the neighborhood will allow. On pre-1940 lots, expect clay and masonry. On a 1990s tract lot, expect a shallow footing that needs to go deeper. We measure the opening, check the swing or slide path, confirm power at the gate location for automatic work, and schedule the install. This is measured, ordered, and scheduled work – not a same-day call.
Driveway Gate Installation
Signs you need it
You’re replacing a failing developer-grade driveway gate, adding privacy and access control to a wide opening, or the existing gate and posts have leaned and racked beyond what adjustment can fix.
What it costs in Denver
Most driveway gate installations in Denver run roughly $2,400 – $6,800 for a manual gate and $4,500 – $12,000 when a LiftMaster or DoorKing operator is part of the job.
How we do it
We measure the opening, set posts to proper footing depth in concrete, hang and square the gate, then wire and program the operator and test every safety edge and sensor before we leave.
Automatic Gate Installation
Signs you need it
You want the gate to open from a vehicle, remote, or keypad instead of by hand, or you’re replacing an operator that’s been out of production for years and no longer worth repairing.
What it costs in Denver
Automation typically adds $1,800 – $5,200 to a gate install, and a full automatic driveway gate in Denver usually lands between $4,500 and $12,000.
How we do it
We confirm the power run, mount the operator to a reinforced post or pier, set the travel limits and reverse sensitivity, pair the remotes and keypad, and walk you through the manual release.
What Gate Installation Costs in Denver
| Item | Typical range in Denver |
|---|---|
| Manual driveway gate installation | $2,400 – $6,800 |
| Automatic driveway gate installation | $4,500 – $12,000 |
| Operator and automation added to an existing gate | $1,800 – $5,200 |
Can you install a gate on an HOA-governed lot in Denver?
Yes, and it’s common. Many Denver-area HOAs set gate style, color, and height, so we confirm the approved design before ordering and keep the install to that spec. Ask your HOA for written approval first.
Do I need a permit to install a gate in Denver?
It depends on height, location, and whether it’s a driveway or pedestrian gate. Most municipalities require a permit for a tall driveway gate or one near a property line, so ask the city’s building department before we order.
Brands We Service in Denver
We work on the brand you already own. That covers LiftMaster, DoorKing, Elite, and Mighty Mule, plus FAAC, BFT, Linear, Viking, and Ghost Controls. We keep common operator parts and hardware on hand, so most repairs don’t wait on a special order. See our brands for the full compatibility list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Denver, CO
| Service | Typical range in Denver |
|---|---|
| Gate repair (hinges, latches, alignment) | $150 – $650 |
| Electric gate repair (operator, controls, sensors) | $200 – $900 |
| Gate operator replacement | $1,200 – $3,800 |
| Wrought-iron gate restoration and re-weld | $400 – $1,600 |
| Post and pier re-setting | $350 – $1,400 |
| Manual driveway gate installation | $2,400 – $6,800 |
| Automatic driveway gate installation | $4,500 – $12,000 |
| Operator and automation added to an existing gate | $1,800 – $5,200 |
| Access control and keypad setup | $300 – $1,100 |
| Safety edge and sensor replacement | $180 – $600 |
What pushes price up in Denver is usually the ground and the gate itself: a shifted masonry pier, a footing that needs re-pouring, a wrought-iron gate that needs forge work instead of a hardware swap, or an automation job that has no power at the gate yet. We quote the job and agree the price with you in writing before any work starts, so the invoice matches the estimate.
Neighborhoods We Serve in Denver
We work across the city, from the historic core out to the newer suburban belt. Repair calls in the older neighborhoods often involve masonry piers and iron restoration; calls in the 1990s and 2000s subdivisions usually involve leaning steel posts and operator failures. Dispatch runs 7am to 7pm, Sunday through Friday, so a Denver call placed in the morning is usually handled the same day for repair work.
- Capitol Hill
- Baker
- Washington Park
- Highland
- Green Valley Ranch
Service Area – Cities Near Denver
We also take gate repair and installation work in the communities ringing Denver. If you’re just outside the city line, we cover Commerce City, CO, Four Square Mile, CO, Sherrelwood, CO, and Welby, CO. The same clay, freeze-thaw, and hail conditions apply across all of them, and the same brand coverage does too. Call and tell us where the gate is and what it’s doing.
Serving Denver, CO – Our Local Coverage Area
We serve Denver and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Denver
For repair work, we aim for same-day dispatch when you call during our 7am to 7pm window, Sunday through Friday. We answer the phone 24/7, and a call outside dispatch hours is booked into the next opening.
We’ll tell you what the city and your HOA will likely require, but the application is yours to file. Check with Denver’s building department on permits and get written HOA approval on style, height, and color before we order anything.
Yes. We serve Denver and the surrounding cities, including Commerce City, Four Square Mile, Sherrelwood, and Welby. If you’re unsure whether your address is in range, call (855) 677-8291 and we’ll confirm before scheduling.
Call (855) 677-8291 for a free estimate on gate repair or installation in Denver. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Your gate, diagnosed and fixed – not guessed at. Gate Repair Denver has served Denver since 2015.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically the same day.
- 4You approve before work beginsNothing starts until you say go.
What Denver Customers Say
"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
- Sana Patel"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
- Emily Brooks"Repair is holding. He was quite a bit later than the window I was given, and the office didn't call me about it, I had to call them. The work itself was done well once he got here."
- Tara Padgett