Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Commerce City, CO
Gate Installation in Commerce City means building a gate that survives a place that is hard on hardware. This city mixes working industrial yards along the refinery corridor and the I-270/Quebec business parks with fast-built subdivisions where privacy fencing went up in the 1990s through the 2010s. The wind off the foothills pushes hard against west-facing gates, and spring wet snow loads the frames. We’re gate-only specialists, so we diagnose what’s actually failing instead of guessing. Call (855) 677-8291.
Why Commerce City Homes Are Different
Commerce City sits on a stretch of Front Range high desert where the weather does as much damage as any driver. Downslope wind gusts come off the foothills and hit wide driveway gates broadside, especially on west-facing exposures, and undersized posts are the first thing to lean. Hard freeze-thaw cycles heave posts and loosen hinges and rollers year after year. Then add the grit: blowing dust and aggregate off industrial yards and gravel lots packs into rollers, tracks and operator housings, and the constant truck traffic keeps it airborne. In the original core near ZIP 80022, older modest homes and small commercial lots sit beside chain-link and ornamental steel gates on the business properties. Out in the newer tracts, standard 10 to 16 ft driveway gates hang on vinyl and wood privacy fencing and take the full wind load with less mass behind them. That combination means hardware here needs adjustment more often than in greener metro suburbs, and cheap operators fail first.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Commerce City Services
Two jobs come up most in Commerce City: putting in a gate that holds up to the wind, and getting an electric gate moving again when it quits.
Gate Repair in Commerce City
On the repair side, the work in Commerce City usually starts with the moving parts: hinges that have loosened, rollers packed with grit, latches that no longer line up, and posts that have heaved out of plumb through freeze-thaw. We check the gate leaf, the frame and the ground it sits on before we touch the operator, because a gate that drags will wear out any motor you put behind it. Blowing dust off the industrial yards means rollers and tracks here need cleaning and adjustment more often than in leafier suburbs. If your gate sticks, sags or won’t latch, we can help. For manual and mechanical fixes, see gate repair.
Electric Gate Repair in Commerce City
When the gate has power and still won’t move, the problem usually lives in the operator, the wiring or the safety devices. Commerce City systems take a beating: wind load fights the motor on every cycle, ice jams the track in a wet snow event, and dust works into the housing. We test the control board, the limits, the photo eyes and the power feed, then fix the actual fault rather than swapping parts until something works. We work on the brand you already own, including FAAC and BFT systems common on commercial properties. For automated systems, see electric gate repair.
Gate Installation in Commerce City
New gate work in Commerce City is really two different jobs wearing one name. On the industrial side, business parks and fenced yards along the refinery corridor and around the railyards need beefed-up security gates and rolling cantilever gates that can take a hit and keep working. In the newer subdivisions, a standard 10 to 16 ft driveway gate has to clear wind gusts coming off the foothills and keep swinging through hard freeze-thaw without the posts walking out of plumb. We handle Gate Installation as a dedicated trade, sizing posts to the gate and the exposure instead of to a generic chart, and we measure on site before anything is ordered.
Automatic Gate Installation
Signs you need it
You’re tired of getting out of the truck in a windstorm to open a wide gate, or the old operator has been repaired so many times that replacing the system costs less than another fix.
What it costs in Commerce City
An automatic gate installation here typically runs about $4,200 to $9,500 depending on gate size, operator, and whether a power run is needed, though the written estimate sets the final price.
How we do it
We measure the opening and check the soil and wind exposure, set properly sized posts to footing depth, hang the gate, mount and program the operator on the brand you choose, and test the safety devices before we hand it over.
Driveway Gate Installation
Signs you need it
The gate is rusted through, out of square, or hanging on posts that have heaved and won’t stay plumb no matter how often they’re reset.
What it costs in Commerce City
A driveway gate installation typically runs about $2,400 to $7,800, with the final number set by material, width and site conditions and confirmed in the written estimate.
How we do it
We clear and set the posts to proper footing depth, hang the leaf square, fit the hinges and latch, and align the gate so it clears through a full swing and takes wind without dragging.
What Gate Installation Costs in Commerce City
| Item | Typical range in Commerce City |
|---|---|
| Automatic gate installation | $4,200 – $9,500 |
| Driveway gate installation | $2,400 – $7,800 |
| Gate operator replacement | $950 – $2,900 |
Do I need a permit for a new gate in Commerce City?
Often you do, especially when the gate is tied to a structure, a power run or a commercial property line. Ask the city’s building department before ordering anything, and we’ll build to what your inspection requires.
Can you install a gate that handles Commerce City wind?
Yes. We size posts and hinges to the gate’s width and its exposure, and set posts to proper footing depth. West-facing gates take the worst of the downslope gusts, so that’s where post size matters most.
Brands We Service in Commerce City
We work on the brand you already own. That includes FAAC, BFT, Linear and Viking operators, along with the rest of the major gate systems you’ll find on Commerce City properties. We keep common gate hardware on hand so most repairs turn around on the first visit. See our brands.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Commerce City, CO
| Service | Typical range in Commerce City |
|---|---|
| Gate repair (hinges, rollers, latch, alignment) | $180 – $650 |
| Electric gate repair (operator, controls, safety devices) | $250 – $1,200 |
| Gate operator replacement | $950 – $2,900 |
| Driveway gate installation | $2,400 – $7,800 |
| Automatic gate installation | $4,200 – $9,500 |
Prices climb here with gate width and weight, the wind exposure of the site, and how much footing and post work is needed to make the gate stand straight. Every job is quoted and agreed before any work starts, and the written estimate sets the final price.
Neighborhoods We Serve in Commerce City
We cover Commerce City from the older streets in the ZIP 80022 core out through the newer subdivisions, and the industrial parks in between. Wind and dust conditions change block to block here, so we look at the actual site before quoting. Fast dispatch runs from 7am to 7pm, Sunday through Friday, and typical on-site arrival in Commerce City is within the hour.
- The original core near ZIP 80022
- Newer subdivisions off Quebec and I-270
- Business parks along the refinery corridor
- Fenced yards near the railyards
Service Area – Cities Near Commerce City
Commerce City sits in the middle of a busy stretch of the north metro, and we cover the towns around it. That includes Sherrelwood, CO to the west, Welby, CO just south, and Federal Heights, CO up the road. We also handle gate work in Denver, CO and the rest of our Gate Repair Denver service area. If you’re not sure we reach your street, call and we’ll tell you straight.
Serving Commerce City, CO – Our Local Coverage Area
We serve Commerce City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Commerce City
Typical on-site arrival in Commerce City is within the hour during dispatch hours. Call (855) 677-8291. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed Saturday.
Check with the city’s building department for permit rules, and check your HOA covenants before you order a gate. Both can affect height, setback and power runs, so sort it out early and we’ll build to what’s approved.
Call (855) 677-8291 and tell us what your gate is doing. We answer 24/7, dispatch Sunday through Friday from 7am to 7pm, and every estimate is free with the price agreed before any work begins.
Call (855) 677-8291 for a free estimate. Whether your opener stopped responding or your gate won’t move at all, we diagnose and fix it, and we install new gates sized for Commerce City wind and ground. We work on the brand you already own, from FAAC and BFT to Linear and Viking, and the price is agreed before we start.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically the same day.
- 4You approve before work beginsNothing starts until you say go.
What Commerce City Customers Say
"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
- Emily Brooks"Repair is holding. He was quite a bit later than the window I was given, and the office didn't call me about it, I had to call them. The work itself was done well once he got here."
- Tara Padgett"Fixed the immediate problem. He was honest that the operator is near end of life and I should budget for a replacement, which I appreciate even if it wasn't what I wanted to hear."
- Daniel Gallagher