Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Denver
If your gate won’t open, won’t close, or drags on the ground, we repair it. Gate Repair Denver is a gate-only shop: we handle iron pedestrian gates, sliding driveway gates, and the electric operators that drive them. We serve homeowners, landlords, and property managers across Denver, from Capitol Hill to Green Valley Ranch, and we know what fails here and why. Call (855) 677-8291. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday.
Why Denver Homeowners Call Gate Repair Denver for Gate Repair
We’ve worked on the gates of Denver since 2015, and that focus shows up in the diagnosis. Specialists who do nothing but gates spot a bad control board or a heaved footing faster than a generalist working across fencing, decks, and everything else. Our technicians work on the brand you already own, and we keep common parts for the operators most Denver properties run.
Denver customers call us because we tell them straight what a gate needs: a repair, a retrofit, or replacement, and when the cheaper answer is the honest one. You get a written estimate before any work starts, and you agree to the price before a tool comes out. Fast dispatch runs 7am to 7pm, Sunday through Friday, so a driveway gate stuck halfway open gets looked at the same day in most cases. Landlords and property managers appreciate one crew that covers both the mechanical gate and its automation instead of two contractors.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Iron Gate Repair in Denver
Iron Gate Repair in Denver means forge-and-weld restoration, not hinge tightening. The old core of the city is full of wrought-iron and early steel pedestrian gates hung on brick-and-stone piers, and when those gates sag, the pier is usually the real problem. That work is a trade of its own, and a Denver homeowner needs it when a gate drags the sidewalk, catches in the latch, or won’t swing square after a wet spring. A typical iron gate restoration in Denver runs $450-$1,200, depending on whether the pier has to be re-set.
Pier re-setting and hinge re-forging
Denver’s expansive clay swells after a wet season, and a footing that heaves tips the whole pier and takes the gate with it. We re-level the pier and re-forge or replace worn hinge straps so the gate hangs true again. That’s ironwork, not electronics, and it keeps an original gate where it belongs.
When restoration beats replacement
An original wrought-iron gate with sound metal is almost always worth restoring. It’s part of the house and it’s built heavier than its modern replacement. Where rust has eaten through the frame or the pickets are paper-thin, we say so, because patching it becomes money spent twice.
Sliding Gate Repair in Denver
Sliding Gate Repair in Denver usually traces back to a footing, not the operator. A sliding gate needs a level track and a buried post, and Denver’s freeze-thaw cycles heave shallow concrete footings. When the post leans, the operator’s rack and pinion misaligns and the gate grinds, lurches, or stops partway. That’s the call we get most across the metro’s newer neighborhoods. A typical sliding gate repair in Denver runs $300-$950 for track and hardware work, and replacing an obsolete operator adds to that, typically $650-$1,900 installed.
Footings, tracks, and rollers
The fix starts underground. We straighten or re-set the footing, true up the track, and replace worn rollers and hinges so the gate rolls clean. Fixing the operator without fixing the footing just breaks the operator again.
When the operator is the problem
Sometimes the panel moves fine by hand but the motor won’t answer. That points to a dead control board, worn limit switches, or lost programming. We test the operator on its own to find out before we touch the gate.
Trusted Brands We Service in Denver
We work on the brand you own. That includes DoorKing, Elite, Mighty Mule, and LiftMaster, among the nine major gate-operator brands we service. Keeping Denver properties on their existing hardware matters, because a working operator doesn’t need replacing just because a technician only knows one brand. We keep common parts on hand for the systems most Denver gates run, so a control board or a limit switch doesn’t mean a multi-week wait. Fast turnaround, a straight diagnosis, and a written price before we start. Call (855) 677-8291.
Common Gate Repair Problems We See in Denver Homes
- Sagging iron gates on tilted piers. Original wrought-iron pedestrian gates on brick piers tilt when Denver’s expansive clay swells after a wet spring. The pier needs re-setting, not just a hinge adjustment.
- Dead control boards in legacy operators. Operators from the 1990s with boards that fail and can’t take modern safety photocells force a full operator replacement.
- Heaved footings on HOA aluminum and vinyl gates. In Stapleton/Central Park and Green Valley Ranch, shallow footings heave and lean over freeze-thaw cycles, misaligning the rack and pinion.
- Hail-punched panels and chalked powder coat. June through August hail dents and cracks vinyl and aluminum panels, and high-altitude UV chalks and fades the finish fast.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Denver, CO
You get a written estimate before any work starts, and the price you agree to is the price. Typical iron gate restoration in Denver runs $450-$1,200, sliding gate hardware work $300-$950, and replacing an obsolete operator $650-$1,900 installed. A small hinge, latch, or lock repair often runs $150-$350. What moves the number is the footing, not the gate: a pier re-set or a heaved post adds real labor, while a straight hardware swap doesn’t. We don’t bill for a service call to look at your gate; the estimate is free, and it’s set per job, not by a menu. Call (855) 677-8291 and we’ll come out and price it.
We Also Serve Cities Near Denver
Denver isn’t the edge of our map. We work gate repair across the neighboring communities too, including Commerce City, Four Square Mile, Sherrelwood, and Welby in Adams County. If your gate sits just outside the city line, the same diagnosis applies, and we’ll let you know when we’re already in your area. Call (855) 677-8291.
Serving Denver, CO – Our Local Coverage Area
We serve Denver and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Denver
We can usually fix the pier and keep the gate. A sagging Capitol Hill iron gate on a brick pier is almost always a footing problem: the expansive clay under it swelled after a wet spring and tipped the pier. We re-set the pier, re-forge the hinge straps, and re-hang the gate square, so the original metal stays on the house. Call (855) 677-8291 for a free on-site estimate.
Yes. We repair the gate you have rather than swapping in a different design, which respects the HOA’s aesthetic requirements. We can straighten a heaved post, re-set the footing, true the track, and replace hinges and rollers with matching hardware. If a panel is damaged, we match the existing style and finish. Call (855) 677-8291 and we’ll price it against the rules.
Some are retrofittable and some aren’t, and we’ll tell you which yours is before you spend money. Older DoorKing, Elite, and similar boards that fail often can’t take modern safety photocells, and on those, retrofitting a dying board is money wasted. A new operator is the cheaper answer then. Call (855) 677-8291 for a diagnosis.
Denver’s dry climate shrinks the wood in summer and the freeze-thaw swing swells and binds it in winter, opening and closing hinge and latch gaps seasonally. That movement is normal here, but a gate that catches or hangs every winter needs adjustment. We can re-set the hinges and latch so the gate tolerates the swing. Call (855) 677-8291.
Usually we can repair just the damaged panels. Hail-punched and cracked vinyl panels in Stapleton/Central Park can be replaced in place, keeping the frame and matching the existing style, provided the posts and footing are sound. Where the footing has heaved and the frame is out of square, we’ll explain the trade-off. Call (855) 677-8291 for a free estimate.
Get a Free Estimate on Your Denver Gate
Whether your opener stopped responding or your gate won’t move at all, one call gets a technician out. From a sagging Capitol Hill iron gate to a heaved aluminum driveway gate in Green Valley Ranch, we diagnose the gate and its operator and quote before we start. Call Gate Repair at (855) 677-8291. We answer 24/7. Fast dispatch, 7am-7pm, Sunday through Friday.
Written by Vernon Hobbs, Owner at Gate Repair Denver, serving Denver since 2015.