Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Access Control Cost in Denver?
Gate access control in Denver typically runs $350 to $650 for a keypad or standalone entry device installed, while a full access-control setup – keypad plus intercom, vehicle loop detector, and phone-app control on an automatic gate – generally lands between $1,200 and $3,500. Repairs to an existing system, like a keypad that lost its codes or a safety loop that stopped sensing, usually fall in the $150 to $450 range. Those are typical estimates for the Denver market in 2026; the written estimate after we look at your gate sets the final price.
We’re gate-only specialists, which matters here. Access control lives at the intersection of the operator, the wiring, and the entry hardware, and a specialist diagnoses the actual fault faster than a generalist who services five different product categories. Whether your opener stopped responding or your gate won’t move at all, we start by finding the real problem instead of guessing at parts.
Key Takeaways
- A single keypad install in Denver usually costs $350-$650; a full integrated access-control system runs $1,200-$3,500.
- Repairs to existing access hardware typically cost $150-$450, and are often cheaper than replacement.
- Wire runs, gate type, and operator brand are the biggest cost drivers, not the entry device itself.
- We work on the brand you already own – LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule.
- The estimate is free and the price is set per job by the written estimate.
Gate Access Control Cost Breakdown (2026)
Here’s how the line items usually break down for a Denver property. These are estimated ranges for the market, not a quote for your specific gate.
| Line Item | Typical Cost Range |
|---|---|
| Standalone keypad install (wired or wireless) | $350 – $650 |
| Keypad repair or reprogramming | $150 – $300 |
| Intercom / video entry station (installed) | $600 – $1,800 |
| Vehicle loop detector install | $450 – $900 |
| Phone-app / smart access module (installed) | $400 – $850 |
| Long wire run to a remote post or pillar | $250 – $800 |
| Full integrated access-control system (keypad + intercom + loop + app) | $1,200 – $3,500 |
| Diagnostic and repair of existing access hardware | $150 – $450 |
What pushes a job toward the top of those ranges? Distance from the gate to the entry point, whether the wire has to be trenched, and how many control functions you want tied together. A single keypad on a swing gate close to the house is a modest job. A long driveway with a keypad out at the street, a video intercom at the house, and a safety loop under the pavement is a bigger project because the wiring and trenching carry the cost, not the electronics. On the repair side, the device is rarely the expensive part – finding why the system stopped sensing or responding is where the time goes.
What Affects Gate Access Control Pricing in Denver
- Gate type and operator. A slide gate and a swing gate use different operators and different wiring paths, so the access hardware has to match what’s already driving the gate. If you’re starting fresh, the operator choice drives the rest of the system.
- Distance and trenching. Denver lots often put the gate well back from the house. The farther the keypad and intercom sit from your power source, the more wire and trenching you’re paying for, and that can rival the cost of the devices.
- How you want to grant access. A keypad alone is the simplest and cheapest entry point. Adding intercom, video, or phone-app control layers on hardware and configuration, so each feature moves you up the range.
- Condition of the existing gate and operator. Access control is only as reliable as the gate it’s attached to. A gate that drags, binds, or has a struggling operator needs that sorted first, or the new entry hardware keeps tripping. Our gate repair side handles that before or alongside the access work.
- Brand compatibility. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so the odds are strong we’re working with the system you already have rather than replacing it.
- Safety devices. Automated gates need reliable sensing so they don’t close on a person or vehicle. A proper loop or photo-eye setup adds cost up front but prevents the repeated faults and the safety problems that come from skipped sensing.
How Gate Access Control Systems Work on a Denver Gate
Access control is the layer that tells the operator when to open. A keypad sends a signal once the right code is entered. A loop detector buried near the gate senses a vehicle and holds or opens the gate. An intercom lets a visitor ask to be let in from the house. An app module ties it to a phone so you can open the gate remotely or grant a one-time code. All of it talks to the operator through low-voltage wiring, which is why the wiring path and the operator brand shape the whole job.
Two things matter for safety. The first is the operator’s power and wiring – mains power to an automated gate is genuinely dangerous, and we recommend leaving that to a trained professional rather than attempting it yourself. The second is the gate itself: a heavy panel moving on its track can crush, and a slide gate that comes loose can come off the track. A working loop detector and set of photo-eyes are what keep the gate from closing on someone, so we don’t treat them as optional add-ons. If you want the underlying gate repaired before access hardware goes on, our Denver team covers the whole cycle, repair and installation both, so you don’t need to bring in a second contractor.
Electric and automated gate work is a core service for us, not something bolted onto another trade. That focus means when a system loses its programming or a keypad goes dead, we go straight to the likely causes instead of working through a general checklist.
Repair or Replace Your Access Control?
Repair is usually the cheaper path when the hardware is sound and something specific has failed – a keypad that lost its codes, a loop that’s drifted out of tune, a module that dropped its connection to the operator. A $150-$450 repair beats a $1,200-$3,500 full system replacement almost every time, and most faults fall into that repair band.
Replacement makes more sense when the entry hardware is old, mismatched to a newer operator, or you’re adding features like intercom and app control you never had. If your gate is still manual and you’re ready to automate, we install the operator and the access layers together so they’re configured to work as one system. The honest answer comes from looking at the gate. An on-site estimate tells you which side of that line you’re on, and it’s free.
How to Save on Gate Access Control
You can keep the cost down without cutting safety. A few practical moves:
- Fix the gate before the electronics. A binding gate wears out operators and trips sensing. Sorting the mechanical side first means the access hardware isn’t fighting a struggling gate.
- Reuse what works. If your keypad, loop, or operator is fine, keep it. We work with the brand you already own, so there’s often no reason to start over.
- Match features to how you actually use the gate. If a keypad covers everyone who needs in, you may not need intercom and video. Add features when they solve a real problem, not by default.
- Plan the layout before trenching. Settling where the keypad and intercom go before the wire goes in avoids paying twice for a run that ends up in the wrong spot.
- Handle safety devices properly the first time. A loop and photo-eyes installed right prevent repeat visits and the faults that come from a quick workaround.
Get the estimate in writing before work starts. That’s how the price is set – per job, by the written estimate, with nothing added on afterward. Call (855) 677-8291 for a free estimate, and we’ll tell you what your gate actually needs.
What Happens When You Call
We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed Saturday. Same-day service is often possible for access-control faults that leave you locked out or unable to open the gate. When we arrive, we diagnose the system – operator, wiring, entry hardware, and safety devices – and give you a written estimate before any work begins. If the fix is a keypad reprogram, that’s a quick job. If it’s a full system, you’ll see the line items up front.
FAQs – Gate Access Control Cost in Denver
How much does a gate keypad cost installed in Denver?
A standalone keypad installed in Denver typically costs $350 to $650. The device itself is the smaller part of that – wiring length and gate access point are what move the price. Call (855) 677-8291 for an exact quote; estimates are free.
How much does a full gate access-control system cost in Denver?
A full integrated system – keypad, intercom, vehicle loop, and phone-app control on an automatic gate – usually runs $1,200 to $3,500 in Denver. The spread comes from trenching distance and how many features you tie together. Call (855) 677-8291 and we’ll scope it against your gate.
Is it cheaper to repair or replace my access control?
Repair is usually cheaper – $150 to $450 for most faults versus $1,200 to $3,500 for a full replacement. If the entry hardware is sound and one piece has failed, repair wins. Call (855) 677-8291 for a free estimate and a straight answer on which way to go.
Can you come today for a gate access-control problem?
Same-day service is often possible. We answer 24/7 and dispatch fast from 7am to 7pm, Sunday through Friday. Call (855) 677-8291. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
Do you work on the access-control brand I already own?
Very likely yes – we service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems. That covers the operator and, in most cases, the access hardware tied to it. Call (855) 677-8291 to confirm your system and get a free estimate.
Get Your Gate Access Control Priced
Whether your opener stopped responding or your gate won’t move at all, a specialist gets to the real fault faster. We’re gate-only specialists in Denver, servicing repair and installation of both mechanical and automated systems, from manual swing gates to fully automated electric setups. The estimate is free and the price is set per job by the written estimate. Call (855) 677-8291. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Gate Repair Denver, serving Denver since 2015.
Pricing reflects the Denver market as of 2026. Gate Repair Denver offers free estimates – call (855) 677-8291.
What Our Customers Say
"Repair is holding. He was quite a bit later than the window I was given, and the office didn't call me about it, I had to call them. The work itself was done well once he got here."
- Tara Padgett"Fixed the immediate problem. He was honest that the operator is near end of life and I should budget for a replacement, which I appreciate even if it wasn't what I wanted to hear."
- Daniel Gallagher"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
- Sofia Torres