Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Repair Cost in Denver?
Gate repair in Denver typically runs $150 to $650 for mechanical fixes, while electric gate repair runs $250 to $1,200 depending on whether the problem is in the operator, the wiring, or the hardware. A full operator replacement or new installation sits higher, usually $1,200 to $4,500. Most single-part repairs land under $400. Those ranges cover the vast majority of residential and light commercial gate jobs we see in Denver, and the written estimate sets your final price.
We’re gate-only specialists, which means we diagnose faster than a generalist who also handles fences and garage doors. Whether your opener stopped responding or your gate won’t move at all, a technician who works on gates all day finds the actual problem sooner. Call (855) 677-8291. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- Mechanical gate repair: $150 to $650 typical
- Electric/automated gate repair: $250 to $1,200 typical
- Operator replacement: $700 to $2,500 typical
- New gate installation: $1,200 to $4,500 typical, more for wide custom drives
- Estimates are free, and the price is set per job by the written estimate, not by a call-center script.
Gate Repair Cost Breakdown (2026)
Here’s what the different jobs typically cost in the Denver market. The ranges are estimated and reflect 2026 pricing for standard residential and light commercial work.
| Service | Typical cost range |
|---|---|
| On-site diagnosis (rolled into repair quote) | Free with estimate |
| Hinge or roller replacement | $150 – $350 |
| Track repair or realignment (slide gates) | $200 – $500 |
| Gate panel alignment and rehang | $250 – $600 |
| Latch, lock, and hardware replacement | $150 – $450 |
| Electric operator repair | $250 – $900 |
| Control board replacement | $350 – $900 |
| Safety sensor and photo-eye replacement | $250 – $650 |
| Keypad, remote, and access control repair | $200 – $700 |
| Full operator replacement (standard residential) | $700 – $2,500 |
| New swing gate installation | $1,200 – $3,500 |
| New slide gate installation | $1,800 – $4,500 |
What drives the range up or down? Mostly the type of operator, the gate material, and how much disassembly is needed to reach the failing part. A stuck limit switch on a standard residential operator is quick. A heavy ornamental slide gate with a burned control board, damaged drive track, and a failed safety system takes more time, so it costs more. Denver’s wide, sloping driveways mean many gates here are longer than average, and long gates are heavier to move and harder on operators, which shows up in the repair bill.
What Affects Gate Repair Pricing in Denver
No two Denver gates are alike, and a few local conditions push the price in specific directions. Here’s what matters most.
- Gate material and weight. A light aluminum residential gate is far easier to work on than a heavy tubular-steel or wrought-iron drive. Heavier gates wear out springs, rollers, and operator gears faster, and they take longer for two technicians to lift or reposition safely.
- Operator brand and model. We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems. Some parts are available off the shelf; others need ordering. If your operator is out of production, we’ll tell you plainly when repair is no longer the better call than replacement.
- Gate length and driveway grade. Denver properties often sit on sloped drives, and that changes the load the operator has to move. A gate on a grade may need a stronger or re-rated operator even if the original one lasted years.
- Automated vs. manual. Manual gate repair stays in the lower bands, mostly hardware and alignment. The moment an electric operator, control board, or access control system is involved, the repair requires more diagnosis and the price reflects that.
- Access control complexity. A single remote is one thing. Intercoms, keypads, telephone entry systems, and multiple vehicle transmitters take longer to program and test. DoorKing and LiftMaster systems with phone entry add diagnosis time.
- Wiring and power. If the problem is in the wiring, in a failed low-voltage run, or in the power supply, the technician has to trace it, and that adds labor. This is one of the areas where the estimate after diagnosis is more accurate than anything quoted over the phone.
If you want the full picture of what we handle, see our Gate Repair Denver service page.
Why a Set Price Is Better Than a Phone Quote
Gate problems are rarely just one problem. A gate that “just stopped” might have a dead operator battery, a limit switch out of adjustment, a bent track, and a safety sensor that’s been silently degrading for months. None of that is visible over the phone. A trustworthy estimate requires a technician to look at the gate, test the operator, check the power, and run the safety circuit. That’s why we price per job after we’ve seen it, and why the written estimate is the number you can count on.
Denver has real temperature swings through the year, and gate hardware lives with that. Metal expands and contracts, rollers dry out, and the outdoor-rated parts on your operator have a working life measured in years. Cold mornings can make a marginal bearing fail outright. Wind and blowing grit work into exposed tracks and hinges. If your gate has been “getting harder to move” for months, the repair is usually cheaper before the next cold snap than after it. Call (855) 677-8291 to get a fast, free estimate.
How to Save on Gate Repair
There’s no trick to lowering gate repair costs. There are just choices that keep a small problem from turning into a big one.
- Call when you first notice the symptom. A gate that reverses randomly or stops halfway is usually a cheap fix. Left alone, the same fault burns out the control board and the price jumps.
- Get a written estimate before work starts. A written estimate protects you. We provide one on every job. If someone won’t put the price on paper, that’s a warning.
- Be honest about DIY attempts. If you’ve already replaced a battery or reset the operator, tell the technician. It saves diagnosis time, and diagnosis time is labor you pay for.
- Service the whole gate, not just the broken part. A one-time visit that replaces the worn hardware you can see and replaces the worn hardware you can’t will cost less than three separate call-outs later.
- Weigh repair vs. replace with real numbers. On an operator more than a decade old with an obsolete control board, replacement is often the lower long-term cost. On a newer operator with a single failed component, repair wins every time.
Estimates are free. If you’re not sure whether you’re looking at a $200 repair or a $2,000 replacement, call (855) 677-8291. We answer 24/7. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
What Does It Cost to Fix an Electric Gate in Denver?
Electric gate repair in Denver usually falls between $250 and $1,200. The lower end is a remote or receiver issue, a sensor out of alignment, or a limit switch. The upper end is a failed control board, a dead operator, or a wiring fault that has to be traced. For the full rundown of what we do on the electrical side, see our gate repair page.
We work on the brand you already own. That covers LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. A specialist who sees those systems daily knows the common failure modes and lands on the right diagnosis faster. Call (855) 677-8291 to book an estimate.
Is It Cheaper to Repair or Replace a Gate?
Repair is cheaper in most cases. Unless the gate’s frame is bent, the posts are failing, or the operator is genuinely out of production and unrepairable, a repair in the $150 to $1,200 range usually beats a full replacement in the $1,200 to $4,500 range. Replacement is the better call when the cost of the next three repairs would approach a new gate, or when the gate has become unsafe to use. We’ll tell you which one makes sense after we’ve looked at it. We’d rather fix what you own than sell you a gate you don’t need.
What Happens When You Call
You call (855) 677-8291, tell us the gate type, manual or electric, and the symptom, and we book a technician to come out and look. On arrival, we test the gate and operator, check the power and wiring, and walk you through what’s failed and what it takes to fix it. You get a written estimate before any work begins. We fix what we can on the spot, because narrow trade focus means faster diagnosis and fewer return visits. From manual swing gates to fully automated electric systems, we cover the whole job.
FAQs – Gate Repair Cost
How much does gate repair cost in Denver?
Gate repair in Denver typically costs $150 to $650 for mechanical fixes and $250 to $1,200 for electric gate repair. Operator replacement sits around $700 to $2,500, and new installation runs $1,200 to $4,500. The written estimate sets your exact price. Call (855) 677-8291 for a free estimate.
Can you come out today?
Same-day service is often possible. We dispatch Sunday through Friday from 7am to 7pm, and a call outside dispatch hours is booked into the next opening. Call (855) 677-8291 to check availability for today.
Do you charge a service or diagnostic fee?
No. Our estimates are free, and the price is set per job by the written estimate. You don’t pay a diagnostic fee to find out what’s wrong. Call (855) 677-8291 to schedule.
Why is my electric gate not responding, and what will it cost?
A gate that won’t respond is usually a dead battery, a failed receiver, or a safety sensor out of alignment, and that kind of repair typically runs $250 to $650. A failed control board or operator runs $350 to $900. Call (855) 677-8291 for a diagnosis and estimate.
Do you work on the brand of gate operator I already have?
Very likely yes. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems. Tell us the brand when you call so we can arrive prepared.
How much does it cost to replace a gate operator?
A standard residential operator replacement typically runs $700 to $2,500 in Denver, depending on the gate size, the operator’s lifting capacity, and whether wiring changes are needed. A written estimate locks in the number before work starts. Call (855) 677-8291.
Get a Free Estimate on Your Denver Gate
If your gate is sticking, reversing, refusing to open, or making noise it didn’t make last year, the fastest way to know what it’ll cost is to have a technician look at it. Estimates are free. We’re gate-only specialists, and we’ll tell you what’s failed, what it takes to fix it, and whether repair or replacement is the smarter money. We’ve served the Denver market since 2015. Call (855) 677-8291. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the Denver market as of 2026. Gate Repair Denver offers free estimates – call (855) 677-8291.
What Our Customers Say
"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
- Marco Herrera"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
- Sana Patel"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
- Emily Brooks